INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY Journal

publication venue for

Integrating data-driven system to predict temperature and distortion in multi-layer direct metal deposition processes 2024
Multi-layer solid-state ultrasonic additive manufacturing of aluminum/copper: local properties and texture 2024
Predictive modeling of porosity in AlSi10Mg alloy fabricated by laser powder bed fusion: A comparative study with RSM, ANN, FL, and ANFIS. 129:1097-1108. 2023
Predictive modeling of porosity in AlSi10Mg alloy fabricated by laser powder bed fusion: A comparative study with RSM, ANN, FL, and ANFIS 2023
Modified GTN parameters calibration in additive manufacturing of Ti-6Al-4 V alloy: a hybrid ANN-PSO approach 2022
In-house processing of 3D printable polyetheretherketone (PEEK) filaments and the effect of fused deposition modeling parameters on 3D-printed PEEK structures 2022
Investigating fracture failure in origami-based sheet metal bending 2022
Toward understanding the effect of remelting on the additively manufactured NiTi 2020
Thermomechanical processing of an ultralight Mg-14Li-1Al alloy 2020
Effects of size and geometry on the thermomechanical properties of additively manufactured NiTi shape memory alloy. 107:3145-3154. 2020
Ball-burnishing factors affecting residual stress of AISI 8620 steel 2020
A prediction model for finding the optimal laser parameters in additive manufacturing of NiTi shape memory alloy. 105:4691-4699. 2019
Microscopic characterization and modeling of oxide layer for electrolytic in-process dressing (ELID) grinding with focus on voltage, electrode-wheel gap, and coolant flow. 105:4853-4862. 2019
Microstructure and mechanical properties of direct metal laser-sintered 15-5PH steel with different solution annealing heat treatments. 105:3499-3520. 2019
Ambient and non-ambient temperature depth-sensing indentation of Mg-Sm2O3 nanocomposites. 105:2947-2956. 2019
Investigating the design and process parameters of folded perforated sheet metal. 102:615-633. 2019
Effect of heat treatments on microstructure/small-scale properties of additive manufactured Ti-6Al-4V. 103:4161-4172. 2019
Friction stir welding of a hypoeutectic Al–Si alloy: microstructural, mechanical, and cyclic response. 101:3001-3019. 2019
Effect of manufacturing parameters on the microstructure and mechanical properties of metal laser sintering parts of precipitate hardenable metals. 99:2491-2507. 2018
On microstructure, hardness, and fatigue properties of friction stir-welded AM60 cast magnesium alloy. 98:2157-2172. 2018
Analytical modeling of the thermal aspects of metalworking fluids in the milling process. 92:3953-3966. 2017
An economic analysis comparing the cost feasibility of replacing injection molding processes with emerging additive manufacturing techniques. 88:2573-2579. 2017
Assessing residual stresses in friction stir welding: neutron diffraction and nanoindentation methods. 93:3733-3747. 2017
Microstructural evolution and mechanical properties of ultrafine grained AA2024 processed by accumulative roll bonding. 93:681-689. 2017
On the passive and electrochemical behavior of severely deformed pure Ti through friction stir processing. 90:991-1002. 2017
An investigation of graph traversal algorithms in folded sheet metal parts design. 69:2237-2246. 2013
Dissimilar friction-stir welding of aluminum and polymer: a review 2019
Numerical simulation of sheet metal forming: a review 2017

category

AUTOMATION & CONTROL SYSTEMS Category
ENGINEERING, MANUFACTURING Category

International Standard Serial Number (ISSN)

0268-3768

Electronic International Standard Serial Number (EISSN)

1433-3015

journal abbreviation

INT J ADV MANUF TECH