INTERNATIONAL JOURNAL OF FATIGUE Journal
Overview
publication venue for
- Synergistic impact of corrosion pitting on the rotating bending fatigue of additively manufactured 316L stainless steel: Integrated experimental and modeling analyses. 188. 2024
- Additively manufactured Ti-5Al-5V-5Mo-3Cr: Understanding defect-fatigue relationships. 187. 2024
- Fatigue response of wire-arc additive manufactured nickel-aluminum bronze (NAB) in the post-annealed condition. 187. 2024
- Very high cycle fatigue characteristics of laser beam powder bed fused AlSi10Mg: A systematic evaluation of part geometry. 189. 2024
- Very high cycle fatigue of laser powder bed fused Al-Cu-Mg-Ag-TiB2 (A20X) Alloy: Stress relief and aging treatments. 183. 2024
- Life prediction and failure analysis in laser powder bed fused TiC/Ti6Al4V titanium matrix composite under high cycle and very high cycle fatigue conditions. 180. 2024
- Investigation of frequency-dependent fatigue crack growth behavior in perfluorosulfonic-acid membrane: In-situ experiment, constitutive modeling and crack growth prediction. 179. 2024
- Notched fatigue of additive manufactured metals under axial and multiaxial loadings, Part I: Effects of surface roughness and HIP and comparisons with their wrought alloys. 143:106003. 2021
- Fatigue of additive manufactured Ti-6Al-4V, Part I: The effects of powder feedstock, manufacturing, and post-process conditions on the resulting microstructure and defects. 132. 2020
- Fatigue of additive manufactured Ti-6Al-4V, Part II: The relationship between microstructure, material cyclic properties, and component performance. 132. 2020
- Creep and fatigue behaviors of High-Density Polyethylene (HDPE): Effects of temperature, mean stress, frequency, and processing technique. 141:105871. 2020
- Multiaxial fatigue behavior of thermoplastics including mean stress and notch effects: Experiments and modeling. 136:105571. 2020
- Multiaxial fatigue of LB-PBF additive manufactured 17–4 PH stainless steel including the effects of surface roughness and HIP treatment and comparisons with the wrought alloy. 137:105646. 2020
- Multiaxial fatigue of additive manufactured metals: Performance, analysis, and applications. 134:105479. 2020
- Novel specimen geometries for fatigue testing of additive manufactured metals under axial, torsion, and combined axial-torsion loadings. 130:105287. 2020
- Evaluation of methods for estimating shear fatigue properties of steels and titanium alloys. 122:19-34. 2019
- Crack paths in additive manufactured metallic materials subjected to multiaxial cyclic loads including surface roughness, HIP, and notch effects. 124:558-570. 2019
- Significance of hot isostatic pressing (HIP) on multiaxial deformation and fatigue behaviors of additive manufactured Ti-6A1-4V including build orientation and surface roughness effects. 117:352-370. 2018
- Multiaxial variable amplitude fatigue life analysis using the critical plane approach, Part II: Notched specimen experiments and life estimations. 106:56-69. 2018
- Multiaxial variable amplitude fatigue life analysis using the critical plane approach, Part I: Un-notched specimen experiments and life estimations. 105:283-295. 2017
- Application of the critical plane approach to the torsional fatigue assessment of welds considering the effect of residual stresses. 101:271-281. 2017
- Fatigue crack behavior in power plant residual heat removal system piping including weld residual stress effects. 101:244-252. 2017
- Cyclic deformation and fatigue behavior of carburized automotive gear steel and predictions including multiaxial stress states. 100:454-465. 2017
- Multiaxial fatigue behavior of wrought and additive manufactured Ti-6Al-4V including surface finish effect. 100:347-366. 2017
- On the consideration of normal and shear stress interaction in multiaxial fatigue damage analysis. 100:322-336. 2017
- Torsional fatigue behavior of wrought and additive manufactured Ti-6A1-4V by powder bed fusion including surface finish effect. 99:187-201. 2017
- Variable amplitude fatigue behavior of neat and short glass fiber reinforced thermoplastics. 98:176-186. 2017
- Friction and roughness induced closure effects on shear-mode crack growth and branching mechanisms. 92:442-458. 2016
- Creep-fatigue interaction and thermo-mechanical fatigue behaviors of thermoplastics and their composites. 91:136-148. 2016
- Multiaxial variable amplitude fatigue life analysis including notch effects. 91:337-351. 2016
- Fatigue behavior of AHSS lap shear and butt arc welds including the effect of periodic overloads and underloads. 87:6-14. 2016
- On the strengthening effect of increasing cycling frequency on fatigue behavior of some polymers and their composites: Experiments and modeling. 87:153-166. 2016
- Critical assessment of the fatigue performance of additively manufactured Ti-6Al-4V and perspective for future research. 85:130-143. 2016
- Fatigue behavior and modeling of short fiber reinforced polymer composites including anisotropy and temperature effects. 77:12-+. 2015
- Notched fatigue behavior and stress analysis under multiaxial states of stress. 67:2-14. 2014
- Small fatigue crack growth under multiaxial stresses. 58:126-135. 2014
- Multiaxial fatigue and life prediction of elastomeric components. 55:92-101. 2013
- Notched fatigue behavior including load sequence effects under axial and torsional loadings. 55:43-53. 2013
- Factors influencing dwell fatigue life in notches of a powder metallurgy superalloy. 48:55-67. 2013
- Surface finish effect on fatigue behavior of forged steel. 36:130-145. 2012
- Multiaxial fatigue: An overview and some approximation models for life estimation. 33:948-958. 2011
- Multiaxial fatigue evaluation using discriminating strain paths. 33:597-609. 2011
- Multiaxial fatigue of titanium including step loading and load path alteration and sequence effects. 32:1862-1874. 2010
- Variable amplitude fatigue behavior and life predictions of case-hardened steels. 32:1126-1135. 2010
- Deformation and fatigue behaviors of case-hardened steels in torsion: Experiments and predictions. 31:1386-1396. 2009
- Experimental evaluation and modeling of sulfur content and anisotropy of sulfide inclusions on fatigue behavior of steels. 31:526-537. 2009
- Fatigue life analysis and predictions for NR and SBR under variable amplitude and multiaxial loading conditions. 30:1231-1247. 2008
- Multiaxial stress effects on fatigue behavior of filled natural rubber. 28:521-529. 2006
- An experimental investigation of deformation and fatigue behavior of coach peel riveted joints. 28:9-18. 2006
- Application of bi-linear log-log S-N model to strain-controlled fatigue data of aluminum alloys and its effect on life predictions. 27:1040-1050. 2005
- Torsional deformation and fatigue of hardened steel including mean stress and stress gradient effects. 26:773-784. 2004
- Fatigue behavior and life predictions of notched specimens made of QT and forged microalloyed steels. 26:663-672. 2004
- Strain-controlled fatigue properties of steels and some simple approximations. 22:495-511. 2000
- Strain-controlled fatigue properties of steels and some simple approximations. 22:495-511. 2000
- CYCLIC DEFORMATION AND FATIGUE BEHAVIOR OF ION-NITRIDED STEEL. 17:15-24. 1995
- Effects of mean stress on fatigue behaviour of a hardened carbon steel. 13:241-248. 1991
- Editorial 2021
- Special Issue on ‘Multiaxial Fatigue 2019’: Selected papers from the 12th International Conference on Multiaxial Fatigue and Fracture (ICMFF12), held in Bordeaux, France, on 24-26 June 2019 2020
- Special Issue on 'Multiaxial fatigue 2016: Experiments and modeling': Selected papers from the 11th International Conference on Multiaxial Fatigue and Fracture (ICMFF11), held in Seville, Spain, on 1-3 June 2016 2017
- Fatigue of short fiber thermoplastic composites: A review of recent experimental results and analysis 2017
- Fatigue behavior and modeling of short fiber reinforced polymer composites: A literature review 2015
- A literature survey on fatigue analysis approaches for rubber 2002
- Cumulative fatigue damage and life prediction theories: a survey of the state of the art for homogeneous materials 1998
Research
category
- ENGINEERING, MECHANICAL Category
- MATERIALS SCIENCE, MULTIDISCIPLINARY Category
Identity
International Standard Serial Number (ISSN)
- 0142-1123
Electronic International Standard Serial Number (EISSN)
- 1879-3452
Other
journal abbreviation
- INT J FATIGUE